SECURITY SCREEN DETAIL

Lansing Housing Products 800-331-8200 Fax 563-538-4392
Model 151 Steel Security Screen Insert

SCOPE

To furnish Steel Security Screens with hardware, screws, and other fitting necessary for a complete installation.  Framing angles shall also be furnished where required.

MATERIALS

1. All sections of the security screen shall be of roll formed lock seam construction formed from tubular 25 gauge galvannealed steel.
2. All wire retainer spline will be of 18 gauge galvannealed steel.
3. Wire cloth shall be standard tensile strength stainless steel alloy #304, .018” diameter.  Optional screens available.

CONSTRUCTION

1. The frame shall be rigidly assembled with a mitered corner construction.  The miter will keyed and staked.
2. Each screen will be form fitted into the frame and secured with 18 gauge galvannealed retainer strip.
3. Depending on the application, the screen and retainer will be riveted or welded to the frame.

FINISH

1. All exposed areas of stainless wire cloth and frames shall be thoroughly washed, rinsed and chemically pre-treated in preparation for powder coating.  A finish polyester powder coat paint shall be electrostatically applied, and baked for a minimum of 15 minutes at 400 degrees F.  Powder coat paint finish shall be a minimum of 1.5 mil thickness.

CERTIFICATION

The steel security screens have been tested and certified by a recognized testing laboratory to meet and/or exceed SMA-6001 specifications.